FEATURES

• 5 year trade warranty and 100% water tested

• 200 psi (13,8 bar) rating

• Unique “reverse flow” porting design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure providing zero stress to prevent “stretching,” a common cause of valve failure

• Reverse flow design for water conservation in the event of failure

• Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action

• Brass shock cone for smooth operation and reduction of water hammer

• Easy-to-use internal manual bleed lever; bleeds valve downstream; has stops for open and closed positions

• Marine-grade S20P solenoid with stainless steel actuator

• High-strength glass-filled body and cover with ¼" stainless steel cover bolts and mating brass body inserts

• Brass non-rising flow control stem throttles valve from full open to closed position

• Excellent for low volume irrigation

• Contamination-resistant (CR)

• Chlorine- and chloramine-resistant EPDM diaphragm material

MODELS

OPTIONS

XPR Pressure Regulator–the Weathermatic XPR pressure regulating module senses inlet pressure and maintains constant outlet pressure

Non-potable alert flow handle may be substituted for the standard flow
handle. Add -NP suffix.

ELECTRICAL

Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups

INSTALLATION

Teflon tape is recommended

1" FIP can be bushed to ¾"

1 ½" FIP can be bushed to 1 ¼"